The interest of an electric window regulator is undeniable in comparison with manual mechanisms. However, it has the drawback of being much more complicated in terms of repairs. In addition, it is not always easy to pinpoint the nature of the failure. Here we will see how to change the electric window of an Iveco Minivan . But before seeing what to do next, you have to be sure you know where the problem is coming from. Indeed, it is sometimes useless to change the entire window regulator, a simple small repair will often suffice. Whether it concerns an electrical short circuit, or simply a lack of lubrication. Now that you are sure what the source of the problem is, let's get back to our topic.window-change-Iveco-Minivan

Replacing an Iveco Minivan window regulator: how to do it

It takes a long time to change a window regulator. Depending on your experience on the subject, plan approximately two o'clock to make sure you don't run out of time. Whether for an Iveco Minivan or another car, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, point by point. We recommend that you take pictures at several stages to help you reassemble the new window regulator.

Removing a window regulator on an Iveco Minivan

  • Disassemble the entire door trim. From mirror cover to handle. This operation should be done rather gently using a flat screwdriver. You will have to make sure you can access the window regulator at all points without being disturbed. This manipulation takes quite a long time to perform.
  • Remove the window regulator seals from your Iveco Minivan. Again, it is essential to do it delicately.
  • Now that you have access to the window regulator, remove the connectors. You can then remove the motor from the window regulator if it is ever blocked.
  • Take out all the fasteners that hold the glass, then remove the latter. It is sometimes advisable to position the window halfway up to be able to carry out this operation. Of course, you will have to be very careful when moving the window. It is best to lay it on a rather thick sheet.
  • Remove the window regulator entirely. It is essential to remember your location. You can take a picture of it if it helps you attach the new window regulator. The window regulator is sometimes held by screws or rivets, you must therefore remove them.

The installation of an electric window of an Iveco Minivan

  • Position the new window regulator. Make sure that its location is identical to the damaged window regulator. You will probably have to use the bindings that you have put aside.
  • Reposition the glass as you removed it. It will sometimes be necessary to rotate it slightly so that it fits properly in its guide.
  • Reconnect the connectors.
  • Replace the seals you removed.
  • Replace all of the door trim.

That's it, you now have a new and working window regulator . You can therefore turn on your car and test it.