The advantage of an electric window regulator is enormous compared to manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to pinpoint the cause of the problem. Here we will see how to fix the electric window regulator on a jeep cherokee . But before you start, you need to be sure you understand where the malfunction came from. Let's be clear, it is sometimes unnecessary to replace the entire window regulator, a simple repair will often work. Whether it's a false contact, or simply a lack of lubrication. Now that you are sure of the source of the problem, let us return to our subject.change-window-lift-jeep-cherokee

Replacing a window regulator for a jeep cherokee: how to do it

Changing a window regulator is quite time consuming. Depending on your experience in the field, plan approximately two o'clock to make sure you have the time you need. Whether it is on a jeep cherokee or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, step by step. We advise you to take photos at several stages to help you mount the new window regulator.

Removing a window regulator on a jeep cherokee

  • Remove the entire door trim. From the handle to the mirror cover. This should be done with enough caution using a flat screwdriver. It will be necessary to ensure that you have access to the window regulator at any point without being disturbed. This manipulation is the longest to perform.
  • Remove the window regulator seals from your jeep cherokee. Again, it's wiser to do it delicately.
  • Now that you have access to the window regulator, remove the connectors. You will then have to disengage the motor from the window regulator when it is stuck.
  • Release all the fasteners that hold the window, then remove the window. It is sometimes better to position the window halfway up to carry out this operation. Obviously, extreme care must be taken when moving the glass. It is best to place it on a rather thick sheet.
  • Remove the window regulator entirely. It is wiser to memorize your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held in place by screws or rivets, so you will need to remove them.

The installation of an electric window regulator of a jeep cherokee

  • Introduce the new window regulator. Make sure that its position is identical to the damaged window regulator. You will no doubt need to use the fasteners you have removed.
  • Reposition the glass just as you removed it. It will sometimes be necessary to move it a little so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals you removed.
  • Replace the entire door trim.

That's it, you now have a new and functional window regulator . So you will need to turn on your car and test it.