The advantage of an electric window regulator is undeniable compared to manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to pinpoint the cause of the problem. In this article, we will discover how to replace the electric window regulator of a Jeep Cj7 . But before seeing the procedure to follow, you must be sure to know where the problem came from. Indeed, it is regularly useless to change the whole window regulator, a simple small repair can sometimes be enough. Whether it's a false contact, or simply a lack of lubrication. Now that you've identified the cause of the problem, let's get back to our topic.change-window-regulator-Jeep-Cj7

Replacing a window regulator for Jeep Cj7: how to do it

Changing a window regulator is relatively long. Depending on your expertise in the field, plan approximately three hours to make sure you have the time you need. Whether for a Jeep Cj7 or another car, this manipulation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take pictures at several stages in order to help you mount the new window regulator.

Removing a window regulator on a Jeep Cj7

  • Remove all of the door trim. From the mirror cover to the handle. This should be done relatively gently using a flat screwdriver. You will have to make sure you have access to the window regulator at all points without being embarrassed. This manipulation is the longest to carry out.
  • Remove the window regulator seals from your Jeep Cj7. Again, it is crucial to do this carefully.
  • Now that you have accessed the window regulator, disconnect the connectors. You must then remove the motor from the window regulator when it is stuck.
  • Take out all the fasteners that hold the glass, then take it out. It is regularly better to place the window halfway up to carry out this operation. Of course, extreme care must be taken when moving the glass. It is advisable to place it on a sufficiently thick sheet.
  • Remove the window regulator entirely. It is essential to memorize your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is regularly held by screws or rivets, you must therefore remove them.

The installation of an electric window regulator of a Jeep Cj7

  • Present the new window regulator. Make sure that its position is identical to the damaged window regulator. You will certainly need to use the fasteners you have set aside.
  • Replace the glass just as you pulled it out. It will be regularly necessary to rotate it a little so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals that you have carefully removed.
  • Refit all of the door trim.

It's good, you now have a new and functional window regulator . You must therefore switch on the ignition and test it.