The advantage of an electric window regulator is enormous compared to manual window regulators. Nevertheless, it has the defect of being much more complex in terms of repairs. Also, it is not necessarily easy to pinpoint the cause of the failure. With this article, we will discover how to change the electric window regulator of a Jeep Ford . But before you start, you need to be sure you know where the problem is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple repair can often suffice. Whether it concerns a false contact, or simply a lack of oil. Now that you've identified the cause of the concern, let's get back to our topic.change-window-regulator-Jeep-Ford

Replacing a Jeep Ford window regulator: how to do it

Changing a window regulator is relatively tedious. Depending on your expertise in the field, plan approximately three hours to make sure you don't get caught up in time. Whether it's on a Ford Jeep or another car, this operation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take pictures at different times to help you mount the new window regulator.

Removing a window regulator on a Jeep Ford

  • Dismantle the entire door trim. From the handle to the mirror cover. This should be done relatively gently using a flat screwdriver. You must ensure that you access the window regulator at all points without being obstructed. This step is the longest to complete.
  • Remove the window regulator seals from your Ford Jeep. Again, it is wiser to take it delicately.
  • Now that you have accessed the window regulator, disconnect the connectors. You can then release the window lifter motor if it is ever blocked.
  • Release all the fasteners that hold the window, then take it out. It is sometimes preferable to position the window halfway up to carry out this manipulation. Obviously you have to be very careful when moving the glass. It is best to place it on a sufficiently thick sheet.
  • Remove the window regulator as a whole. It is wiser to remember your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held in place by screws or rivets, you must therefore remove them.

The installation of an electric window regulator of a Jeep Ford

  • Fit the new window regulator. Make sure that its position is similar to the previous window regulator. You should definitely use the fasteners you have set aside.
  • Reposition the glass in the same way as you took it out. It will sometimes be necessary to move it slightly so that it fits properly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Replace all of the door trim.

It's good, you now have a new and working window regulator . You can therefore turn on your car and test it.