The interest of an electric window regulator is undeniable in comparison with manual systems. On the other hand, it has the disadvantage of being much more complicated in terms of repairs. In addition, it is not necessarily easy to determine precisely the nature of the failure. In this article we will see how to change the electric window on a Kia Carens 2 . But before seeing what to do next, you have to be sure you understand where the problem is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple repair will sometimes work. Whether it's an electrical short circuit, or just a lack of oiling. Now that you have identified the origin of the problem, let's get back to our subject.change-window-lift-Kia-Carens-2

How to replace a Kia Carens 2 window regulator

It takes a long time to change a window regulator. Depending on your experience in the field, count approximately two o'clock to make sure you have the necessary time. Whether for a Kia Carens 2 or on another vehicle, this operation is for experienced handymen. So let's see how to do it, point by point. We recommend that you take pictures at several stages to help you fit the new window regulator.

Removing a window regulator on a Kia Carens 2

  • Remove the entire door trim. From the handle to the retro cover. This operation should be done rather delicately using a flat screwdriver. Make sure you have access to the window regulator at all points without being disturbed. This manipulation takes quite a long time to perform.
  • Remove the gaskets from the window regulator from your Kia Carens 2. Again, it is wiser to go about it delicately.
  • Now that you have access to the window regulator, disconnect the connectors. You must then remove the motor from the window regulator if it is stuck.
  • Release all of the fasteners that hold the window in place, then remove the window. It is sometimes more judicious to position the window halfway up to carry out this operation. Obviously you will have to be very careful when moving the window. It is advisable to put it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is wiser to memorize your position well. You can take a picture of it if it helps you attach the new window regulator. The window regulator is sometimes held by screws or rivets, so you have to remove them.

Installing a Kia Carens 2 electric window regulator

  • Present the new window regulator. Make sure that its position is similar to the damaged window regulator. You should definitely use the fasteners you removed.
  • Replace the glass as you took it out. It will sometimes be necessary to rotate it slightly so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals that you have carefully removed.
  • Replace the entire door trim.

That's it, you now have a new and functional window regulator . So you have to put the ignition on and test it.