The advantage of an electric window regulator is undeniable in comparison with manual systems. However, it has the disadvantage of being much more complex in terms of repairs. Also, it is not always easy to pinpoint the source of the problem. Here we will see how to replace the electric window regulator of a Kia Carens . But before you start, you need to be sure you understand where the failure came from. Indeed, it is regularly useless to change the whole window regulator, a simple repair will sometimes be enough. Whether it's a false contact, or simply a lack of lubrication. Now that you've identified the source of the problem, let's get to the heart of the matter.
How to replace a Kia Carens window regulator
Changing a window regulator is relatively tedious. Depending on your expertise in the field, plan approximately three hours to make sure you don't get caught up in time. Whether on a Kia Carens or another vehicle, this repair is for experienced DIY enthusiasts. So let's look at what to do, step by step. It is advisable to take photos at different times to help you reassemble the new window regulator.
Removing a window regulator on a Kia Carens
- Dismantle the entire door trim. From the handle to the mirror cover. This should be done relatively carefully using a flat screwdriver. You must ensure that you access the window regulator at all points without being obstructed. This manipulation is the longest to carry out.
- Remove the window regulator seals from your Kia Carens. Again, it is essential to do it delicately.
- Now that you have accessed the window regulator, disconnect the connectors. You can then release the window lifter motor if it is stuck.
- Remove all the fasteners that hold the glass, then remove the glass. It is regularly preferable to place the window halfway up to be able to carry out this operation. Of course you will have to be extremely careful when handling the glass. It is best to place it on a sufficiently thick sheet.
- Remove the window regulator entirely. It is essential to memorize your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is regularly maintained by screws or rivets, so it will be necessary to remove them.
The installation of an electric window regulator of a Kia Carens
- Position the new window regulator. Make sure that its location is identical to the damaged window regulator. You will probably have to use the clips you removed.
- Replace the glass as you removed it. It will be regularly necessary to rotate it a little so that it fits correctly in its guide.
- Connect the connectors.
- Replace the seals that you have carefully removed.
- Replace all of the door trim.
It's good, you now have a new and functional window regulator . So you can turn on your car and test it.