The advantage of an electric window regulator is enormous in comparison with manual window regulators. However, it has the disadvantage of being much more complex in terms of repairs. In addition, it is not necessarily easy to identify precisely the source of the failure. With this article, we will discover how to repair the electric window regulator of a Kia Carnival 2 . But before you see what to do, you need to be sure you understand where the problem is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple repair can sometimes work. Whether it concerns a false contact, or simply a lack of lubrication. Now that you've identified the source of the concern, let's get to the heart of the matter.change-window-lift-Kia-Carnival-2

How to replace a Kia Carnival 2 window regulator

Changing a window regulator is quite time consuming. Depending on your experience in the field, plan approximately two o'clock to make sure you don't get caught up in time. Whether it is on a Kia Carnival 2 or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's look at how to do it, step by step. We advise you to take photos at different times to help you install the new window regulator.

Removing a window regulator on a Kia Carnival 2

  • Remove all of the door trim. From the mirror cover to the handle. This should be done very gently using a flat screwdriver. It will be necessary to ensure access to the window regulator at any point without being obstructed. This step is quite long to perform.
  • Disassemble the window regulator seals from your Kia Carnival 2. Again, it's important to do it gently.
  • Now that you have accessed the window regulator, remove the connectors. You can then remove the motor from the window regulator when it is blocked.
  • Release all the fasteners that hold the glass, then remove the glass. It is sometimes preferable to position the window halfway up to be able to carry out this operation. Obviously, extreme care must be taken when handling the glass. It is advisable to place it on a sufficiently thick sheet.
  • Disassemble the window regulator completely. It is important to remember its location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held by screws or rivets, you must therefore remove them.

Installing a Kia Carnival 2 electric window regulator

  • Present the new window regulator. Make sure that its location is similar to the damaged window lifter. You will probably have to use the fasteners you have set aside.
  • Replace the glass in the same way as you removed it. It will sometimes be necessary to rotate it a little so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Replace all of the door trim.

It's done, you now have a new and functional window regulator . You can therefore switch on the ignition and test it.