The advantage of an electric window regulator is substantial compared to manual systems. On the other hand, it has the defect of being much more complicated in terms of repairs. Also, it is not always easy to pinpoint the nature of the fault. In this article we will see how to fix the electric window regulator on a Kia Carnival . But before seeing the procedure to follow, you must be sure to understand where the dysfunction comes from. Indeed, it is regularly unnecessary to replace the entire window regulator, a simple small repair can sometimes be enough. Whether it concerns a false contact, or simply a lack of lubrication. Now that you've identified the cause of the malfunction, let's get to the heart of the matter.
Replacing a Kia Carnival window regulator: how to do it
Replacing a window regulator is relatively time-consuming. Depending on your expertise in the field, count approximately two o'clock to make sure you have the time you need. Whether on a Kia Carnival or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's see what to do, step by step. It is advisable to take photos at several stages in order to help you mount the new window regulator.
Removing a window regulator on a Kia Carnival
- Remove the entire door trim. From the handle to the mirror cover. This should be done relatively carefully using a flat screwdriver. You will have to make sure you have access to the window regulator at all points without being embarrassed. This step is quite long to perform.
- Disassemble the window regulator seals from your Kia Carnival. Again, it is wiser to take it delicately.
- Now that you have accessed the window regulator, remove the connectors. You can then release the window lifter motor if it is blocked.
- Release all the fasteners that hold the window, then release it. It is regularly preferable to place the window halfway up to carry out this manipulation. Of course, extreme care must be taken when handling the glass. It is best to place it on a sufficiently thick sheet.
- Disassemble the window regulator entirely. It is wiser to remember your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is regularly held by screws or rivets, so they must be removed.
The installation of an electric window regulator of a Kia Carnival
- Fit the new window regulator. Make sure that its position is similar to the previous window regulator. You will no doubt need to use the fasteners that you have removed.
- Replace the glass just as you removed it. It will regularly be necessary to rotate it a little so that it fits properly in its guide.
- Reconnect the connectors.
- Replace the seals that you have carefully removed.
- Reassemble the door trim assembly.
That's it, you now have a new and functional window regulator . So you can put the ignition on and test it.