The interest of an electric window regulator is undeniable in comparison with manual window regulators. On the other hand, it has the disadvantage of being much more complex in terms of repairs. In addition, it is not always easy to identify the exact cause of the failure. With this article we will see how to replace the electric window regulator of a Kia Picanto 2 . But before seeing what to do next, you need to be sure you understand where the failure is coming from. Let's be clear, it is sometimes unnecessary to change the entire window regulator, a simple small repair can often work. Whether it's an electrical short circuit, or just a lack of lubrication. Now that you're sure where the problem is, let's get back to our topic.change-window-lift-Kia-Picanto-2

How to replace a Kia Picanto 2 window regulator

Changing a window regulator is relatively long. Depending on your expertise on the subject, plan approximately two o'clock to make sure you don't get caught up in the time. Whether on a Kia Picanto 2 or on another vehicle, this repair is for experienced handymen. So let's see how to do it, step by step. It is advisable to take pictures at several stages in order to help you reassemble the new window regulator.

Removing a window regulator on a Kia Picanto 2

  • Remove the entire door trim. From the handle to the retro cover. This operation should be done relatively carefully using a flat screwdriver. It will be necessary to make sure to have access to the window regulator at all points without being hampered. This manipulation is the longest to perform.
  • Remove the gaskets from the window regulator on your Kia Picanto 2. Once again, it is essential to proceed with caution.
  • Now that you have accessed the window regulator, disconnect the connectors. You will then have to remove the motor from the window regulator if it is ever stuck.
  • Remove all the clips that hold the glass, then release the glass. It is sometimes advisable to position the window halfway up to perform this operation. Of course you have to be very careful when handling the glass. It is best to put it on a rather thick sheet.
  • Remove the window regulator completely. It is essential to remember your location well. You can take a picture of it if it helps you fit the new window regulator. The window regulator is sometimes held by screws or rivets, so you must remove them.

The installation of an electric window regulator of a Kia Picanto 2

  • Fit the new window regulator. Make sure that its location is similar to the previous window regulator. You may need to use the fasteners you have set aside.
  • Replace the glass just as you took it out. It will sometimes be necessary to rotate it a little so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Refit the entire door trim.

That's it, you now have a new and functional window regulator . You will need to turn on your car and test it.