The value of an electric window regulator is enormous compared to manual systems. On the other hand, it has the disadvantage of being much more complex in terms of repairs. Also, it is not necessarily easy to determine precisely the source of the problem. In this article we will find out how to change the electric window on a Kia Picanto 3 . But before you start, you have to be sure you understand where the failure came from. Indeed, it is sometimes useless to change the entire window regulator, a simple repair can sometimes work. Whether it's a bad contact, or simply a lack of lubrication. Now that you're sure what's causing the concern, let's get to the heart of the matter.change-window-lift-Kia-Picanto-3

How to replace a Kia Picanto 3 window regulator

Changing a window regulator is quite tedious. Depending on your experience on the subject, count about two o'clock to make sure you don't run out of time. Whether on a Kia Picanto 3 or on another vehicle, this repair is for experienced handymen. So let's take a look at what to do, step by step. It is advisable to take a picture at different times to help you fit the new window regulator.

Removing a window regulator on a Kia Picanto 3

  • Remove the entire door trim. From mirror cover to handle. This operation should be done fairly delicately with a flat screwdriver. Make sure you have access to the window regulator at all points without being hampered. This step is the longest to perform.
  • Remove the window regulator gaskets from your Kia Picanto 3. Once again, it is essential to do it delicately.
  • Now that you have accessed the window regulator, remove the connectors. You will then have to disengage the window lifter motor if it is ever stuck.
  • Take out all the fasteners that hold the window in place, then remove the window. It is sometimes more advisable to place the window halfway up in order to be able to carry out this operation. Obviously you will have to be very careful when handling the glass. It is preferable to place it on a sufficiently thick sheet.
  • Completely disassemble the window regulator. It is essential to retain your position. You can take a picture of it if it helps you fit the new window regulator. The window regulator is sometimes held in place by screws or rivets, so they have to be removed.

The installation of an electric window regulator of a Kia Picanto 3

  • Present the new window regulator. Make sure that its position is similar to the damaged window regulator. You will certainly need to use the fasteners you removed.
  • Replace the glass just as you removed it. It will sometimes be necessary to rotate it a little so that it fits properly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Reassemble the door trim assembly.

That's it, you now have a new and working window regulator . You will have to put the ignition on and test it.