The advantage of an electric window regulator is undeniable in comparison with manual mechanisms. However, it has the disadvantage of being much more complex in terms of repairs. In addition, it is not always easy to identify precisely the source of the failure. With this article we will see how to fix the electric window regulator on a Kia Pop . But before you start, you have to be sure you understand where the problem came from. Let's be clear, it is sometimes unnecessary to replace the entire window regulator, a simple repair will sometimes work. Whether it concerns an electrical short circuit, or just a lack of oiling. Now that you've identified the cause of the problem, let's get to the heart of the matter.
Replacing a Kia Pop window regulator: how to do it
Changing a window regulator is quite time consuming. Depending on your expertise in the field, count approximately two o'clock to make sure you have the time you need. Whether it's on a Kia Pop or another car, this repair is for experienced DIY enthusiasts. So let's see how to do it, step by step. We advise you to take pictures at several stages to help you mount the new window regulator.
Removing a window regulator on a Kia Pop
- Remove the entire door trim. From the handle to the mirror cover. This should be done very gently with a flat screwdriver. You will have to make sure you have access to the window regulator at all points without being embarrassed. This step is the longest to perform.
- Remove the window regulator seals from your Kia Pop. Again, it's important to do it delicately.
- Now that you have accessed the window regulator, remove the connectors. You must then remove the motor from the window regulator when it is stuck.
- Take out all the fasteners that hold the glass, then take it out. It is sometimes better to position the window halfway up to be able to carry out this operation. Obviously you have to be very careful when handling the glass. It is advisable to put it on a rather thick sheet.
- Remove the window regulator entirely. It is important to remember your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held in place by screws or rivets, so you must remove them.
Installing a Kia Pop electric window regulator
- Position the new window regulator. Make sure that its position is identical to the damaged window regulator. You will certainly have to use the fixings that you removed.
- Replace the glass in the same way as you removed it. It will sometimes be necessary to rotate it a little so that it fits properly in its guide.
- Reconnect the connectors.
- Fit the seals that you have carefully removed.
- Replace the door trim assembly.
It's done, you now have a new and functional window regulator . So you need to turn on your car and test it.