The advantage of an electric window regulator is enormous compared to manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. In addition, it is not necessarily easy to identify precisely the origin of the problem. In this article, we will discover how to replace the electric window regulator of a Kia Pregio . But before you start, you need to be sure you know where the malfunction came from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair can sometimes work. Whether it concerns a false contact, or simply a lack of oil. Now that you are sure of the source of the concern, let us return to our subject.change-window-lift-Kia-Pregio

How to replace a Kia Pregio window regulator

Replacing a window regulator is relatively tedious. Depending on your experience on the subject, count approximately two o'clock to make sure you have the time you need. Whether for a Kia Pregio or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take photos at several stages in order to help you mount the new window regulator.

Removing a window regulator on a Kia Pregio

  • Remove the entire door trim. From the handle to the mirror cover. This should be done relatively carefully with a flat screwdriver. It will be necessary to ensure that you have access to the window regulator at any point without being disturbed. This manipulation is quite long to perform.
  • Disassemble the window regulator seals from your Kia Pregio. Again, it is essential to take it delicately.
  • Now that you have access to the window regulator, remove the connectors. You will then have to disengage the window lifter motor if it is ever stuck.
  • Remove all the fasteners that hold the glass, then release it. It is sometimes better to place the window halfway up to be able to carry out this operation. Of course we will have to be very careful when moving the glass. It is advisable to place it on a rather thick sheet.
  • Disassemble the window regulator entirely. It is essential to memorize your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is at times held by screws or rivets, so they must be removed.

Installing a Kia Pregio electric window regulator

  • Present the new window regulator. Make sure that its position is similar to the damaged window lifter. You will certainly have to use the fasteners that you have set aside.
  • Replace the glass in the same way as you took it out. At times it will be necessary to rotate it a little so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Refit the entire door trim.

It's good, you now have a new and functional window regulator . You will need to turn on your car and test it.