The advantage of an electric window regulator is undeniable compared to manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to determine precisely the source of the failure. With this article, we will see how to replace the electric window regulator on a Kia Pride . But before seeing the procedure to follow, you must be sure to understand where the failure comes from. Indeed, it is regularly unnecessary to change the entire window regulator, a simple repair can often suffice. Whether it concerns a false contact, or simply a lack of lubrication. Now that you've identified the source of the concern, let's get back to our topic.
Replacing a Kia Pride window regulator: how to do it
Replacing a window regulator is relatively tedious. Depending on your experience in the field, plan approximately three hours to make sure you don't get caught up in time. Whether for a Kia Pride or another vehicle, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take pictures at several stages in order to help you mount the new window regulator.
Removing a window regulator on a Kia Pride
- Remove the entire door trim. From the mirror cover to the handle. This should be done relatively gently with a flat screwdriver. You must ensure that you have access to the window regulator at all points without being obstructed. This manipulation is quite long to perform.
- Disassemble the window regulator seals from your Kia Pride. Again, it's wiser to do it delicately.
- Now that you have accessed the window regulator, remove the connectors. You can then remove the motor from the window regulator if it is stuck.
- Remove all the clips that hold the glass, then remove the glass. It is regularly preferable to place the window halfway up to carry out this operation. Naturally it will be necessary to be extremely careful when moving the glass. It is advisable to place it on a rather thick sheet.
- Disassemble the window regulator completely. It is wiser to memorize your location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is regularly held in place by screws or rivets, which will have to be removed.
Installing a Kia Pride electric window regulator
- Fit the new window regulator. Make sure that its location is identical to the previous window regulator. You will certainly need to use the fasteners you have set aside.
- Replace the glass in the same way as you removed it. It will be regularly necessary to move it a little so that it fits properly in its guide.
- Reconnect the connectors.
- Replace the seals that you have carefully removed.
- Replace the door trim assembly.
That's it, you now have a new and working window regulator . So you can switch on and test it.