The advantage of an electric window regulator is substantial in comparison with manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. In addition, it is not necessarily easy to pinpoint the cause of the problem. In this article, we will discover how to repair the electric window regulator of a Kia Pro Cee D . But before you start, make sure you know where the fault is coming from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can sometimes be enough. Whether it's an electrical short circuit, or simply a lack of oil. Now that you've identified the cause of the problem, let's get back to our topic.change-window-regulator-Kia-Pro-Cee-D

How to replace a Kia Pro Cee D window regulator

Changing a window regulator is rather tedious. Depending on your expertise in the field, plan approximately three hours to make sure you don't get caught up in time. Whether for a Kia Pro Cee D or another car, this operation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take pictures at several stages to help you reassemble the new window regulator.

Removing a window regulator on a Kia Pro Cee D

  • Remove the entire door trim. From the handle to the mirror cover. This should be done rather gently using a flat screwdriver. It will be necessary to make sure to have access to the window regulator in any point without being obstructed. This manipulation is the longest to execute.
  • Remove the window regulator seals from your Kia Pro Cee D. Again, it is essential to do this gently.
  • Now that you have access to the window regulator, disconnect the connectors. You can then remove the motor from the window regulator if it is ever stuck.
  • Remove all the fasteners that hold the glass, then remove the glass. It is sometimes better to position the window halfway up to carry out this manipulation. Obviously, extreme care must be taken when moving the glass. It is best to put it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is essential to memorize your location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is at times held in place by screws or rivets, so you must remove them.

The installation of an electric window regulator of a Kia Pro Cee D

  • Position the new window regulator. Make sure that its location is similar to the previous window regulator. You will no doubt need to use the fasteners that you have removed.
  • Reposition the glass as you removed it. At times it will be necessary to move it slightly so that it fits properly in its guide.
  • Reconnect the connectors.
  • Replace the seals you removed.
  • Replace the door trim assembly.

It's done, you now have a new and working window regulator . So you can turn on your car and test it.