The advantage of an electric window regulator is enormous compared to manual window regulators. Nevertheless, it has the defect of being much more complicated in terms of repairs. Also, it is not necessarily easy to identify precisely the cause of the problem. Here we will find out how to repair the electric window regulator of a Kia Provo . But before seeing the procedure to follow, you must be sure to understand where the dysfunction comes from. Indeed, it is from time to time unnecessary to replace the entire window regulator, a simple repair can sometimes suffice. Whether it concerns a false contact, or just a lack of lubrication. Now that you've identified the nature of the concern, let's get back to our topic.change-window-lift-Kia-Provo

Replacing a Kia Provo window regulator: how to do it

Replacing a window regulator is quite time consuming. Depending on your expertise in the field, count approximately three hours to make sure you have the time you need. Whether for a Kia Provo or another vehicle, this manipulation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take pictures at several stages to help you reassemble the new window regulator.

Removing a window regulator on a Kia Provo

  • Remove the entire door trim. From the handle to the mirror cover. This should be done very gently using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This step is quite long to perform.
  • Remove the window regulator seals from your Kia Provo. Again, it is essential to do it delicately.
  • Now that you have access to the window regulator, remove the connectors. You must then disengage the window lifter motor in the event that it is stuck.
  • Release all the fasteners that hold the glass, then take it out. It is from time to time more advisable to position the window halfway up to be able to carry out this manipulation. Of course you have to be very careful when handling the glass. It is best to place it on a sufficiently thick sheet.
  • Remove the window regulator entirely. It is essential to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held by screws or rivets, it is therefore necessary to remove them.

Installation of an electric window regulator on a Kia Provo

  • Introduce the new window regulator. Make sure that its location is similar to the previous window regulator. You will certainly need to use the fasteners you have set aside.
  • Reposition the glass just as you took it out. It will be necessary from time to time to rotate it a little so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals you removed.
  • Replace the entire door trim.

That's it, you now have a new and functional window regulator . You must therefore switch on the ignition and test it.