The interest of an electric window regulator is consequent in comparison with manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not always easy to pinpoint the origin of the failure. With this article we will see how to change the electric window on a Kia Rio 2 . But before you start, you need to be sure you know where the problem is coming from. Let's be clear, it is sometimes unnecessary to change the entire window regulator, a simple small repair can often work. Whether it concerns a false contact, or simply a lack of oiling. Now that you've identified the cause of the malfunction, let's get back to our topic.
How to replace a Kia Rio 2 window regulator
The replacement of a window regulator is relatively long. Depending on your expertise on the subject, count approximately two o'clock to make sure you don't get caught up in the time. Whether for a Kia Rio 2 or another car, this repair is for experienced DIY enthusiasts. So let's see how to do it, point by point. We recommend that you take pictures at different times to help you fit the new window regulator.
Removing a window regulator on a Kia Rio 2
- Disassemble the entire door trim. From mirror cover to handle. This manipulation must be done relatively carefully with a flat screwdriver. Make sure to access the window regulator at all points without being hampered. This manipulation is quite long to perform.
- Remove the window regulator seals from your Kia Rio 2. Once again, it is important to do this with caution.
- Now that you have accessed the window regulator, remove the connectors. You can then release the window lifter motor if it is blocked.
- Remove all the clips that hold the glass, then remove the glass. It is sometimes advisable to place the window halfway up to be able to carry out this manipulation. Obviously we will have to be super careful when moving the glass. It is best to put it on a rather thick sheet.
- Remove the window regulator completely. It is important to remember your location well. You can take a picture of it if it helps you attach the new window regulator. The window regulator is sometimes held by screws or rivets, they must therefore be removed.
Installing a Kia Rio 2 electric window regulator
- Fit the new window regulator. Make sure that its location is identical to the damaged window regulator. You should definitely use the clips you removed.
- Reposition the glass as you removed it. At times it will be necessary to move it slightly so that it fits properly in its guide.
- Reconnect the connectors.
- Fit the seals that you have carefully removed.
- Replace all of the door trim.
It's done, you now have a new and functional window regulator . You can therefore turn on your car and test it.