The advantage of an electric window regulator is enormous in comparison with manual window regulators. However, it has the defect of being much more complicated in terms of repairs. In addition, it is not necessarily easy to determine precisely the nature of the problem. In this article we will see how to replace the electric window regulator of a Kia Rio 3 . But before you start, you need to be sure you know where the malfunction is coming from. Let's be clear, it is from time to time unnecessary to change the entire window regulator, a simple repair can often work. Whether it's a false contact, or just a lack of lubrication. Now that you've identified the source of the problem, let's get back to our topic.change-window-regulator-Kia-Rio-3

How to replace a Kia Rio 3 window regulator

Changing a window regulator is quite tedious. Depending on your expertise on the subject, count approximately three hours to make sure you don't get caught up in time. Whether it is on a Kia Rio 3 or on another car, this manipulation is for experienced DIY enthusiasts. So let's take a look at what to do, step by step. It is advisable to take pictures at several stages in order to help you mount the new window regulator.

Removing a window regulator on a Kia Rio 3

  • Remove the entire door trim. From the handle to the mirror cover. This should be done with enough caution using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being obstructed. This step is the longest to perform.
  • Remove the window regulator seals from your Kia Rio 3. Again, it's important to do it gently.
  • Now that you have accessed the window regulator, disconnect the connectors. You can then remove the motor from the window regulator if it is stuck.
  • Take out all of the fasteners that hold the glass, then release it. It is from time to time more advisable to position the window halfway up to perform this operation. Naturally, great care must be taken when moving the glass. It is best to put it on a sufficiently thick sheet.
  • Remove the window regulator as a whole. It is important to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held in place by screws or rivets, you must therefore remove them.

Installing a Kia Rio 3 electric window regulator

  • Fit the new window regulator. Make sure that its position is similar to the previous window regulator. You will probably have to use the clips you removed.
  • Reposition the glass as you removed it. It will be necessary from time to time to rotate it a little so that it fits correctly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Replace the entire door trim.

It's good, you now have a new and functional window regulator . You can therefore switch on the ignition and test it.