The advantage of an electric window regulator is enormous compared to manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. In addition, it is not always easy to identify precisely the origin of the problem. Here we will find out how to change the electric window regulator of a Kia Rio . But before you start, you have to be sure you understand where the breakdown is coming from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair can sometimes be enough. Whether it concerns an electrical short circuit, or simply a lack of lubrication. Now that you are sure of the source of the concern, let us return to our subject.
Replacing a Kia Rio window regulator: how to do it
Replacing a window regulator is quite time consuming. Depending on your experience in the field, count approximately three hours to make sure you have the time you need. Whether it's on a Kia Rio or another car, this repair is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take photos at different times to help you reassemble the new window regulator.
Removing a window regulator on a Kia Rio
- Remove all of the door trim. From the handle to the mirror cover. This should be done with enough caution using a flat screwdriver. It will be necessary to ensure that you have access to the window regulator at any point without being disturbed. This step is the longest to complete.
- Remove the window regulator seals from your Kia Rio. Again, it is essential to do this carefully.
- Now that you have accessed the window regulator, disconnect the connectors. You can then remove the motor from the window regulator if it is blocked.
- Release all the fasteners that hold the glass, then take it out. It is sometimes preferable to position the window halfway up to carry out this manipulation. Obviously, extreme care must be taken when moving the glass. It is advisable to place it on a sufficiently thick sheet.
- Remove the window regulator completely. It is essential to memorize your location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is at times held by screws or rivets, so they must be removed.
Installing a Kia Rio electric window regulator
- Position the new window regulator. Make sure that its location is identical to the previous window regulator. You probably need to use the fasteners that you have set aside.
- Replace the glass as you removed it. At times it will be necessary to move it slightly so that it fits properly in its guide.
- Connect the connectors.
- Fit the seals that you have carefully removed.
- Replace all of the door trim.
It's good, you now have a new and functional window regulator . So you can turn on your car and test it.