The advantage of an electric window regulator is enormous compared to manual window regulators. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the source of the problem. Here we will see how to change the electric window regulator of a Kia Rocsta . But before seeing the procedure to follow, you must be sure to understand where the dysfunction comes from. Indeed, it is regularly unnecessary to replace the entire window regulator, a simple small repair will sometimes work. Whether it concerns a false contact, or simply a lack of lubrication. Now that you are sure of the source of the concern, let us return to our subject.change-window-lift-Kia-Rocsta

Replacing a window regulator from Kia Rocsta: how to do it

The replacement of a window regulator is rather long. Depending on your expertise in the field, plan approximately two o'clock to make sure you don't get caught up in time. Whether it's on a Kia Rocsta or another car, this operation is for experienced DIY enthusiasts. So let's see how to do it, step by step. We advise you to take pictures at several stages in order to help you mount the new window regulator.

Removing a window regulator on a Kia Rocsta

  • Remove the entire door trim. From the mirror cover to the handle. This should be done very gently using a flat screwdriver. You will have to make sure to access the window regulator at any point without being embarrassed. This manipulation is the longest to perform.
  • Disassemble the window regulator seals from your Kia Rocsta. Again, it is essential to take it delicately.
  • Now that you have accessed the window regulator, remove the connectors. You will then have to remove the motor from the window regulator when the window is blocked.
  • Take out all the fasteners that hold the glass, then remove it. It is regularly better to position the window halfway up to carry out this operation. Naturally, great care must be taken when moving the glass. It is advisable to place it on a sufficiently thick sheet.
  • Disassemble the window regulator entirely. It is essential to memorize your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is regularly held in place by screws or rivets, so they must be removed.

The installation of an electric window regulator of a Kia Rocsta

  • Fit the new window regulator. Make sure that its location is similar to the previous window regulator. You should probably use the fasteners you have set aside.
  • Replace the glass as you removed it. It will regularly be necessary to move it slightly so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals you removed.
  • Refit the entire door trim.

It's good, you now have a new and working window regulator . You will therefore have to switch on and test it.