The value of an electric window regulator is enormous compared to manual systems. However, it has the drawback of being much more complex in terms of repairs. Also, it is not always easy to precisely identify the source of the problem. With this article we will see How to repair the electric window of a Kia Sephia 2 . But before you start, you need to be sure you know where the failure came from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair will sometimes work. Whether it concerns an electrical short circuit, or only a lack of oiling. Now that you are sure where the problem is, let's get back to our topic.change-window-Kia-Sephia-2

Kia Sephia 2 window regulator replacement: how to do it

The replacement of a window regulator is rather long. Depending on your experience on the subject, plan approximately three hours in order to be sure that you have the necessary time. Whether on a Kia Sephia 2 or on another car, this operation is for experienced DIY enthusiasts. So let's see how to do it, step by step. We recommend that you take a picture at different times to help you fit the new window regulator.

Removing a window regulator on a Kia Sephia 2

  • Remove the entire door trim. From mirror cover to handle. This operation should be done rather gently using a flat screwdriver. It will be necessary to make sure to have access to the window regulator at all points without being hampered. This manipulation is the longest to perform.
  • Remove the seals from the window regulator from your Kia Sephia 2. Again, it is wiser to go about it delicately.
  • Now that you have accessed the window regulator, disconnect the connectors. You can then release the window lifter motor if it is ever blocked.
  • Remove all the clips that hold the glass in place, then release the glass. It is sometimes advisable to position the window halfway up to be able to carry out this operation. Of course you will have to be very careful when handling the glass. It is best to put it on a rather thick sheet.
  • Disassemble the window regulator completely. It is wiser to memorize its location well. You can take a picture of it if it can help you attach the new window regulator. The window regulator is sometimes held by screws or rivets, so you have to remove them.

The installation of an electric window of a Kia Sephia 2

  • Position the new window regulator. Make sure that its position is similar to the damaged window regulator. You will certainly need to use the fasteners you removed.
  • Replace the glass the same way you removed it. It will sometimes be necessary to move it slightly so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Fit the seals that you have carefully removed.
  • Replace all of the door trim.

That's it, you now have a new and working window regulator . So you can switch on and test it.