The advantage of an electric window regulator is undeniable compared to manual systems. However, it has the disadvantage of being much more complex in terms of repairs. Also, it is not necessarily easy to determine precisely the cause of the failure. With this article, we will see how to replace the electric window regulator of a Kia Sorento . But before seeing the procedure to follow, you must be certain to understand where the failure came from. Indeed, it is from time to time unnecessary to replace the entire window regulator, a simple repair can sometimes be enough. Whether it's a false contact, or just a lack of oil. Now that you are sure of the source of the concern, let us return to our subject.change-window-lift-Kia-Sorento

Replacing a Kia Sorento window regulator: how to do it

Replacing a window regulator is rather time-consuming. Depending on your experience on the subject, count about three hours to make sure you have the time you need. Whether it is on a Kia Sorento or on another car, this manipulation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take pictures at several stages in order to help you reassemble the new window regulator.

Removing a window regulator on a Kia Sorento

  • Remove the entire door trim. From the mirror cover to the handle. This should rather be done with care using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This manipulation is quite long to perform.
  • Remove the window regulator seals from your Kia Sorento. Again, it's important to do it delicately.
  • Now that you have accessed the window regulator, remove the connectors. You must then disengage the window regulator motor when it is blocked.
  • Take out all the fasteners that hold the glass, then release it. It is from time to time more advisable to place the window halfway up to carry out this manipulation. Of course we will have to be very careful when moving the glass. It is advisable to place it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is important to remember its location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is occasionally held in place by screws or rivets, you must therefore remove them.

The installation of an electric window regulator of a Kia Sorento

  • Fit the new window regulator. Make sure that its position is identical to the damaged window lifter. You will probably have to use the fixings that you removed.
  • Replace the glass in the same way as you removed it. It will be necessary from time to time to rotate it a little so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Reassemble the door trim assembly.

It's good, you now have a new and working window regulator . You must therefore switch on the ignition and test it.