The advantage of an electric window regulator is substantial in comparison with manual window regulators. However, it has the disadvantage of being much more complex in terms of repairs. Also, it is not necessarily easy to pinpoint the cause of the problem. In this article we will see how to change the electric window regulator of a Kia Soul 2 . But before seeing the procedure to follow, you must be sure to know where the failure comes from. Let's be clear, it is sometimes unnecessary to replace the entire window regulator, a simple repair can sometimes be enough. Whether it concerns a false contact, or simply a lack of lubrication. Now that you are sure of the origin of the concern, let us return to our subject.change-window-lift-Kia-Soul-2

Replacing a Kia Soul 2 window regulator: how to do it

Replacing a window regulator is quite tedious. Depending on your experience in the field, plan approximately three hours to make sure you have the time you need. Whether it is for a Kia Soul 2 or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take pictures at several stages to help you reassemble the new window regulator.

Removing a window regulator on a Kia Soul 2

  • Remove the entire door trim. From the handle to the mirror cover. This should be done with enough caution using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This step is quite long to perform.
  • Remove the window regulator seals from your Kia Soul 2. Again, it is essential to do this gently.
  • Now that you have accessed the window regulator, disconnect the connectors. You must then release the window lifter motor when it is stuck.
  • Release all of the fasteners that hold the glass, then take it out. It is sometimes better to place the window halfway up to be able to carry out this operation. Of course we will have to be very careful when moving the glass. It is best to put it on a sufficiently thick sheet.
  • Remove the window regulator as a whole. It is essential to remember your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is at times held in place by screws or rivets, so they must be removed.

Installing an electric window regulator on a Kia Soul 2

  • Fit the new window regulator. Make sure that its position is identical to the damaged window regulator. You will probably have to use the clips you removed.
  • Replace the glass just as you removed it. At times it will be necessary to move it a little so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Replace the entire door trim.

That's it, you now have a new and working window regulator . So you have to turn on your car and test it.