The advantage of an electric window regulator is undeniable compared to manual window regulators. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to pinpoint the source of the problem. With this article, we will discover how to replace the electric window regulator on a Kia Stonic . But before you start, you have to be sure you understand where the malfunction is coming from. Let's be clear, it is regularly unnecessary to change the entire window regulator, a simple repair will sometimes be enough. Whether it concerns an electrical short circuit, or simply a lack of lubrication. Now that you are sure of the cause of the problem, let's get to the heart of the matter.change-window-lift-Kia-Stonic

Replacing a window regulator from Kia Stonic: how to do it

Changing a window regulator is relatively time-consuming. Depending on your expertise on the subject, plan approximately three hours to make sure you have the time you need. Whether it's on a Kia Stonic or another vehicle, this repair is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take pictures at several stages to help you reassemble the new window regulator.

Removing a window regulator on a Kia Stonic

  • Remove all of the door trim. From the handle to the mirror cover. This should be done relatively carefully using a flat screwdriver. It will be necessary to ensure access to the window regulator at any point without being obstructed. This manipulation is the longest to perform.
  • Disassemble the window regulator seals from your Kia Stonic. Again, it is essential to take it delicately.
  • Now that you have accessed the window regulator, disconnect the connectors. You will then have to remove the motor from the window regulator if it is ever stuck.
  • Remove all the fasteners that hold the glass, then release it. It is regularly better to place the window halfway up to carry out this operation. Of course we will have to be extremely careful when moving the glass. It is best to place it on a sufficiently thick sheet.
  • Disassemble the window regulator as a whole. It is essential to memorize your location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is regularly held by screws or rivets, it will therefore be necessary to remove them.

Installing an electric window regulator on a Kia Stonic

  • Fit the new window regulator. Make sure that its position is similar to the previous window regulator. You will certainly need to use the fasteners you have set aside.
  • Replace the glass just as you took it out. It will be regularly necessary to move it a little so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Replace the seals that you have carefully removed.
  • Replace all of the door trim.

That's it, you now have a new and functional window regulator . You will therefore have to switch on and test it.