The advantage of an electric window regulator is enormous in comparison with manual window regulators. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not always easy to pinpoint the nature of the problem. With this article, we will discover how to change the electric window regulator of a Kia Venga . But before you start, be sure you know where the problem is coming from. Let's be clear, it is sometimes unnecessary to replace the entire window regulator, a simple repair can sometimes work. Whether it concerns an electrical short circuit, or simply a lack of lubrication. Now that you've identified the source of the problem, let's get to the heart of the matter.change-window-lift-Kia-Venga

How to replace a Kia Venga window regulator

Changing a window regulator is relatively time-consuming. Depending on your experience on the subject, plan approximately three hours to make sure you don't get caught up in time. Whether for a Kia Venga or another car, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, step by step. We advise you to take photos at several stages in order to help you reassemble the new window regulator.

Removing a window regulator on a Kia Venga

  • Remove the entire door trim. From the handle to the mirror cover. This should be done relatively carefully using a flat screwdriver. You will have to make sure you have access to the window regulator at any point without being disturbed. This manipulation is the longest to carry out.
  • Disassemble the window regulator seals from your Kia Venga. Again, it is crucial to do this carefully.
  • Now that you have accessed the window regulator, remove the connectors. You can then remove the motor from the window regulator if it is ever blocked.
  • Take out all of the fasteners that hold the glass, then release it. It is sometimes better to place the window halfway up to be able to carry out this operation. Of course you will have to be very careful when handling the glass. It is advisable to place it on a sufficiently thick sheet.
  • Disassemble the window regulator completely. It is essential to memorize your location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held by screws or rivets, so they must be removed.

The installation of an electric window regulator of a Kia Venga

  • Fit the new window regulator. Make sure that its position is identical to the previous window regulator. You should definitely use the fasteners you have set aside.
  • Replace the glass just as you removed it. It will sometimes be necessary to rotate it a little so that it fits properly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Refit the entire door trim.

That's it, you now have a new and functional window regulator . So you can turn on your car and test it.