The advantage of an electric window regulator is substantial in comparison with manual mechanisms. However, it has the disadvantage of being much more complex in terms of repairs. Also, it is not necessarily easy to identify precisely the source of the failure. With this article, we will see how to replace the electric window regulator of a Lancia Appia . But before you start, you have to be sure you understand where the problem came from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair will sometimes suffice. Whether it's a false contact, or just a lack of lubrication. Now that you've identified the nature of the concern, let's get back to our topic.change-window-regulator-Lancia-Appia

How to replace a Lancia Appia window regulator

Changing a window regulator is quite time consuming. Depending on your expertise on the subject, count about three hours to make sure you don't get caught in the weather. Whether it is for a Lancia Appia or on another vehicle, this operation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take photos at different times to help you reassemble the new window regulator.

Removing a window regulator on a Lancia Appia

  • Dismantle the entire door trim. From the handle to the mirror cover. This should be done with enough caution using a flat screwdriver. You will have to make sure to access the window regulator at any point without being disturbed. This step is quite long to perform.
  • Remove the window regulator seals from your Lancia Appia. Again, it is essential to take it delicately.
  • Now that you have accessed the window regulator, disconnect the connectors. You must then release the window lifter motor if it is stuck.
  • Release all the fasteners that hold the glass, then remove it. It is sometimes more advisable to position the window halfway up to carry out this manipulation. Obviously, extreme care must be taken when handling the glass. It is best to place it on a sufficiently thick sheet.
  • Remove the window regulator entirely. It is essential to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held in place by screws or rivets, it will therefore be necessary to remove them.

Installation of an electric window regulator on a Lancia Appia

  • Introduce the new window regulator. Make sure that its position is similar to the damaged window lifter. You should definitely use the bindings you have set aside.
  • Replace the glass in the same way as you removed it. It will sometimes be necessary to rotate it slightly so that it fits properly in its guide.
  • Reconnect the connectors.
  • Replace the seals you removed.
  • Refit all of the door trim.

That's it, you now have a new and functional window regulator . You must therefore turn on your car and test it.