The advantage of an electric window regulator is substantial in comparison with manual window regulators. On the other hand, it has the disadvantage of being much more complicated in terms of repairs. In addition, it is not necessarily easy to pinpoint the nature of the problem. Here we will find out how to replace the electric window regulator of a Lancia Beta . But before you start, you have to be sure you know where the failure came from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple small repair will sometimes work. Whether it's an electrical short circuit, or just a lack of lubrication. Now that you're sure where the concern is, let's get to the heart of the matter.window-regulator-Lancia-Beta

How to replace a Lancia Beta window regulator

Changing a window regulator is quite tedious. Depending on your expertise in the field, plan approximately three hours in order to be sure that you have the necessary time. Whether for a Lancia Beta or on another car, this operation is for experienced DIY enthusiasts. So let's see what to do, point by point. It is advisable to take a picture in several steps to help you reassemble the new window regulator.

Removing a window regulator on a Lancia Beta

  • Remove the entire door trim. From mirror cover to handle. This manipulation must be done carefully enough using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This manipulation is the longest to perform.
  • Remove the window regulator gaskets from your Lancia Beta. Again, it's important to go about it with care.
  • Now that you have accessed the window regulator, disconnect the connectors. You can then remove the motor from the window regulator if it is ever blocked.
  • Remove all the clips that hold the glass in place, then remove the glass. It is sometimes more advisable to place the window halfway up to perform this manipulation. Of course, you will have to be extremely careful when moving the window. It is advisable to put it on a rather thick sheet.
  • Completely disassemble the window regulator. It is important to remember your position well. You can take a picture of it if it helps you fit the new window regulator. The window regulator is sometimes held in place by screws or rivets, so you have to remove them.

The installation of an electric window of a Lancia Beta

  • Present the new window regulator. Make sure that its location is identical to the previous window regulator. You will certainly need to use the clips you removed.
  • Replace the glass as you took it out. It will sometimes be necessary to rotate it a little so that it fits properly in its guide.
  • Reconnect the connectors.
  • Replace the seals you removed.
  • Replace all of the door trim.

It's good, you now have a new and working window regulator . So you can put the ignition on and test it.