The interest of an electric window regulator is undeniable in comparison with manual mechanisms. On the other hand, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not always easy to precisely identify the origin of the problem. Here we will see how to change the electric window of a Lancia . But before you start, you have to be sure you understand where the problem is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple small repair can sometimes work. Whether it's a bad contact, or simply a lack of lubrication. Now that you've identified the source of the problem, let's get back to our topic.
Replacing a Lancia window regulator: how to do it
It takes a long time to change a window regulator. Depending on your expertise on the subject, plan approximately three hours to make sure you don't get caught up in the weather. Whether on a Lancia or on another car, this operation is for experienced DIY enthusiasts. So let's see how to do it, step by step. We recommend that you take a picture in several steps to help you fit the new window regulator.
Removing a window regulator on a Lancia
- Remove the entire door trim. From the handle to the retro cover. This operation should be done rather carefully using a flat screwdriver. You will have to ensure that you have access to the window regulator at all points without being disturbed. This step is the longest to perform.
- Remove the window regulator seals from your Lancia. Again, it's important to go about it gently.
- Now that you have access to the window regulator, disconnect the connectors. You will then have to take out the motor of the window regulator if it is ever blocked.
- Remove all of the fasteners that hold the glass, then release the glass. It is sometimes better to position the window halfway up to perform this operation. Of course, we will have to be very careful when moving the window. It is preferable to place it on a sufficiently thick sheet.
- Disassemble the window regulator completely. It is important to remember your position. You can take a picture of it if it helps you fit the new window regulator. The window regulator is sometimes held in place by screws or rivets, so you have to remove them.
The installation of an electric window of a Lancia
- Position the new window regulator. Make sure that its location is similar to the previous window regulator. You will probably need to use the fasteners you put aside.
- Reposition the glass as you removed it. It will sometimes be necessary to rotate it slightly so that it fits properly in its guide.
- Reconnect the connectors.
- Fit the seals you removed.
- Refit the entire door trim.
That's it, you now have a new and working window regulator . You will therefore have to switch on and test it.