The advantage of an electric window regulator is enormous compared to manual window regulators. However, it has the disadvantage of being much more complex in terms of repairs. In addition, it is not always easy to pinpoint the source of the fault. In this article, we will see how to replace the electric window regulator of a Nissan Kubistar . But before seeing the procedure to follow, you must be certain of knowing where the problem comes from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair will sometimes suffice. Whether it's a false contact, or simply a lack of oiling. Now that you are sure of the source of the problem, let's get to the heart of the matter.
How to replace a Nissan Kubistar window regulator
It takes a long time to change a window regulator. Depending on your expertise in the field, plan approximately two o'clock to make sure you don't get caught up in time. Whether it's on a Nissan Kubistar or another car, this operation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take pictures at several stages to help you mount the new window regulator.
Removing a window regulator on a Nissan Kubistar
- Remove all of the door trim. From the mirror cover to the handle. This should be done very gently with a flat screwdriver. You must ensure that you access the window regulator at all points without being obstructed. This step is quite long to perform.
- Disassemble the window regulator seals from your Nissan Kubistar. Again, it's wiser to do it delicately.
- Now that you have accessed the window regulator, disconnect the connectors. You will then have to remove the motor from the window regulator if it is ever blocked.
- Take out all the fasteners that hold the glass, then release it. It is sometimes better to position the window halfway up to be able to carry out this operation. Naturally it will be necessary to be extremely careful when moving the glass. It is best to put it on a sufficiently thick sheet.
- Disassemble the window regulator entirely. It is wiser to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held by screws or rivets, it will therefore be necessary to remove them.
Installation of an electric window regulator for a Nissan Kubistar
- Fit the new window regulator. Make sure that its location is similar to the previous window regulator. You should definitely use the fasteners you removed.
- Reposition the glass in the same way as you removed it. It will sometimes be necessary to rotate it a little so that it fits correctly in its guide.
- Reconnect the connectors.
- Fit the seals you removed.
- Replace all of the door trim.
It's done, you now have a new and working window regulator . So you will need to turn on your car and test it.