The advantage of an electric window regulator is substantial in comparison with manual mechanisms. However, it has the defect of being much more restrictive in terms of repairs. Also, it is not necessarily easy to identify precisely the origin of the problem. In this article, we will see how to fix the electric window regulator on a Seat 124 . But before you start, you have to be sure you understand where the dysfunction came from. Let us be clear, it is from time to time unnecessary to replace the entire window regulator, a simple small repair will often work. Whether it concerns an electrical short circuit, or just a lack of lubrication. Now that you've identified the source of the problem, let's get to the heart of the matter.window-changer-Seat-124

Replacing a window regulator in Seat 124: how to do it

Changing a window regulator is rather tedious. Depending on your experience on the subject, count about two o'clock to make sure you have the time you need. Whether it is on a Seat 124 or on another vehicle, this operation is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take pictures at different times to help you mount the new window regulator.

Removing a window regulator on a Seat 124

  • Remove the entire door trim. From the handle to the mirror cover. This should rather be done with care using a flat screwdriver. You will have to make sure to access the window regulator at any point without being embarrassed. This step is the longest to perform.
  • Remove the window regulator seals from your Seat 124. Again, this is essential to do so with care.
  • Now that you have access to the window regulator, remove the connectors. You must then remove the motor from the window regulator if it is stuck.
  • Remove all of the fasteners that hold the glass, then release it. It is from time to time more judicious to place the window halfway up to be able to carry out this manipulation. Naturally, extreme care must be taken when handling the glass. It is best to put it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is essential to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held in place by screws or rivets, so you must remove them.

Installation of an electric window regulator for a Seat 124

  • Fit the new window regulator. Make sure that its location is similar to the damaged window regulator. You will probably have to use the fasteners that you have set aside.
  • Replace the glass as you removed it. It will be necessary from time to time to rotate it slightly so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Reassemble the door trim assembly.

It's good, you now have a new and functional window regulator . So you have to turn on your car and test it.