The advantage of an electric window regulator is undeniable compared to manual mechanisms. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to determine precisely the source of the failure. In this article, we will discover how to replace the electric window regulator of a Seat 132 . But before seeing the procedure to follow, you must be sure to understand where the failure came from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple repair will often work. Whether it's a false contact, or simply a lack of lubrication. Now that you're sure of the cause, let's get to the heart of the matter.window-changer-Seat-132

Replacing a window regulator in Seat 132: how to do it

Changing a window regulator is relatively tedious. Depending on your experience on the subject, count approximately three hours to make sure you don't get caught up in time. Whether on a Seat 132 or on another car, this manipulation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take photos at different times to help you reassemble the new window regulator.

Removing a window regulator on a Seat 132

  • Dismantle the entire door trim. From the mirror cover to the handle. This should be done relatively gently using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This manipulation is the longest to perform.
  • Remove the window regulator seals from your Seat 132. Again, it is wiser to do this with caution.
  • Now that you have accessed the window regulator, remove the connectors. You will then have to disengage the window lifter motor if it is blocked.
  • Release all the fasteners that hold the window, then release it. It is sometimes advisable to position the window halfway up to be able to carry out this manipulation. Naturally, you will have to be very careful when handling the glass. It is best to place it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is wiser to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is at times held in place by screws or rivets, so they must be removed.

Installation of an electric window regulator for a Seat 132

  • Position the new window regulator. Make sure that its location is identical to the damaged window regulator. You should definitely use the fasteners you have set aside.
  • Replace the glass just as you removed it. At times it will be necessary to move it slightly so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals that you have carefully removed.
  • Refit all of the door trim.

That's it, you now have a new and working window regulator . You will therefore have to switch on and test it.