The advantage of an electric window regulator is substantial in comparison with manual mechanisms. Nevertheless, it has the defect of being much more complicated in terms of repairs. In addition, it is not necessarily easy to pinpoint the cause of the problem. In this article, we will see how to repair the electric window regulator of a seat alhambra . But before seeing the procedure to follow, you must be sure to understand where the failure comes from. Indeed, it is regularly unnecessary to change the entire window regulator, a simple repair can sometimes be enough. Whether it's a false contact, or simply a lack of oiling. Now that you are sure of the origin of the problem, let us return to our subject.
How to replace a seat alhambra window regulator
The replacement of a window regulator is relatively long. Depending on your experience in the field, count approximately three hours to make sure you don't get caught up in time. Whether for a seat alhambra or on another vehicle, this operation is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take photos at several stages to help you reassemble the new window regulator.
Removing a window regulator on a seat alhambra
- Remove the entire door trim. From the mirror cover to the handle. This should be done relatively carefully using a flat screwdriver. You will have to make sure you have access to the window regulator at all points without being embarrassed. This manipulation is quite long to execute.
- Disassemble the window regulator seals from your seat alhambra. Again, it's wiser to do it delicately.
- Now that you have access to the window regulator, disconnect the connectors. You can then remove the motor from the window regulator when it is stuck.
- Remove all the fasteners that hold the glass, then take it out. It is regularly preferable to place the window halfway up to carry out this manipulation. Of course we will have to be super careful when moving the glass. It is advisable to place it on a sufficiently thick sheet.
- Disassemble the window regulator entirely. It is wiser to memorize your location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is regularly held by screws or rivets, so they must be removed.
Installation of an electric window regulator in a seat alhambra
- Introduce the new window regulator. Make sure that its location is identical to the damaged window regulator. You will probably need to use the fasteners you have set aside.
- Replace the glass as you removed it. It will be regularly necessary to rotate it a little so that it fits correctly in its guide.
- Connect the connectors.
- Replace the seals you removed.
- Replace the entire door trim.
It's done, you now have a new and working window regulator . So you can put the ignition on and test it.