The advantage of an electric window regulator is undeniable compared to manual mechanisms. However, it has the defect of being much more complex in terms of repairs. In addition, it is not always easy to identify precisely the nature of the failure. Here we will find out how to replace the electric window regulator of a Seat Altea Freetrack . But before you start, be sure you know where the problem is coming from. Indeed, it is regularly useless to replace the whole window regulator, a simple repair will often work. Whether it concerns an electrical short circuit, or simply a lack of oiling. Now that you've identified the root of the problem, let's get back to our topic.window-changer-Seat-Altea-Freetrack

Replacing a window regulator in Seat Altea Freetrack: how to do it

Replacing a window regulator is rather time-consuming. Depending on your experience in the field, count approximately two o'clock to make sure you don't get caught up in time. Whether for a Seat Altea Freetrack or another vehicle, this manipulation is for experienced DIY enthusiasts. So let's take a look at how to do it step by step. It is advisable to take pictures at several stages to help you install the new window regulator.

Removing a window regulator on a Seat Altea Freetrack

  • Remove all of the door trim. From the handle to the mirror cover. This should be done rather gently using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being obstructed. This manipulation is the longest to carry out.
  • Remove the window regulator seals from your Seat Altea Freetrack. Again, it is wiser to do it carefully.
  • Now that you have access to the window regulator, remove the connectors. You will then have to remove the motor from the window regulator in case it is blocked.
  • Release all the fasteners that hold the window, then release it. It is regularly better to position the window halfway up to be able to carry out this manipulation. Of course, extreme care must be taken when handling the glass. It is best to place it on a rather thick sheet.
  • Remove the window regulator entirely. It is wiser to remember your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is regularly held by screws or rivets, so they must be removed.

Installing an electric window regulator on a Seat Altea Freetrack

  • Position the new window regulator. Make sure that its location is similar to the previous window regulator. You should probably use the fixings you removed.
  • Replace the glass as you removed it. It will be regularly necessary to move it a little so that it fits properly in its guide.
  • Connect the connectors.
  • Fit the seals you removed.
  • Refit all of the door trim.

It's done, you now have a new and functional window regulator . You will have to put the ignition on and test it.