The advantage of an electric window regulator is enormous compared to manual systems. On the other hand, it has the defect of being much more complex in terms of repairs. In addition, it is not necessarily easy to identify precisely the source of the failure. Here we will see how to replace the electric window regulator of a Seat Arona . But before you start, you need to be sure you understand where the failure is coming from. Indeed, it is regularly useless to replace the whole window regulator, a simple small repair can sometimes work. Whether it concerns an electrical short circuit, or just a lack of lubrication. Now that you are sure of the nature of the problem, let us return to our subject.window-changer-Seat-Arona

How to replace a Seat Arona window regulator

The replacement of a window regulator is quite long. Depending on your experience on the subject, plan approximately two o'clock to make sure you don't get caught up in time. Whether for a Seat Arona or another vehicle, this operation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take pictures at different times to help you mount the new window regulator.

Removing a window regulator on a Seat Arona

  • Remove the entire door trim. From the mirror cover to the handle. This should be done very gently with a flat screwdriver. You must ensure that you have access to the window regulator at all points without being embarrassed. This manipulation is quite long to perform.
  • Remove the window regulator seals from your Seat Arona. Again, it is crucial to do this carefully.
  • Now that you have access to the window regulator, remove the connectors. You can then release the window lifter motor if it is stuck.
  • Release all the fasteners that hold the glass, then take it out. It is regularly preferable to place the window halfway up to be able to carry out this operation. Obviously we will have to be extremely careful when moving the glass. It is advisable to place it on a rather thick sheet.
  • Remove the window regulator completely. It is essential to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is regularly held by screws or rivets, it is thus necessary to remove them.

Installation of an electric window regulator on a Seat Arona

  • Position the new window regulator. Make sure that its position is identical to the previous window regulator. You will probably need to use the fasteners you have set aside.
  • Reposition the glass as you removed it. It will regularly be necessary to rotate it slightly so that it fits correctly in its guide.
  • Connect the connectors.
  • Replace the seals that you have carefully removed.
  • Refit the entire door trim.

It's good, you now have a new and working window regulator . So you can switch on and test it.