The advantage of an electric window regulator is enormous compared to manual mechanisms. Nevertheless, it has the defect of being much more complicated in terms of repairs. Also, it is not necessarily easy to identify precisely the source of the failure. With this article we will see how to change the electric window regulator of a seat exeo . But before seeing the procedure to follow, you must be certain to understand where the failure comes from. Indeed, it is from time to time unnecessary to change the entire window regulator, a simple small repair can sometimes work. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you've identified the source of the problem, let's get to the heart of the matter.change-window-regulator-seat-exeo

How to replace a seat exeo window regulator

Changing a window regulator is relatively tedious. Depending on your expertise on the subject, plan approximately two o'clock to make sure you have the time you need. Whether on a seat exeo or on another car, this operation is for experienced DIY enthusiasts. So let's look at what to do, step by step. We advise you to take pictures at different times to help you reassemble the new window regulator.

Removing a window regulator on a seat exeo

  • Remove all of the door trim. From the handle to the mirror cover. This should be done relatively gently using a flat screwdriver. You will have to make sure you have access to the window regulator at all points without being embarrassed. This manipulation is quite long to execute.
  • Remove the window regulator seals from your seat exeo. Again, it is crucial to do this carefully.
  • Now that you have access to the window regulator, remove the connectors. You must then remove the motor from the window regulator if it is stuck.
  • Remove all the fasteners that hold the glass, then remove the glass. It is occasionally advisable to position the window halfway up to be able to carry out this operation. Of course we will have to be extremely careful when moving the glass. It is advisable to put it on a sufficiently thick sheet.
  • Remove the window regulator as a whole. It is essential to remember your position well. You can take a picture of it if it helps you to install the new window regulator. The window regulator is occasionally held in place by screws or rivets, so they must be removed.

Installation of an electric window regulator for a seat exeo

  • Position the new window regulator. Make sure that its location is similar to the previous window regulator. You will probably have to use the bindings you have set aside.
  • Replace the glass as you removed it. It will be necessary from time to time to make it move a little so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Refit all of the door trim.

That's it, you now have a new and working window regulator . So you will need to turn on your car and test it.