The advantage of an electric window regulator is enormous in comparison with manual window regulators. However, it has the disadvantage of being much more complex in terms of repairs. In addition, it is not necessarily easy to pinpoint the source of the problem. Here we will see how to repair the electric window regulator of a Seat Fura . But before seeing the procedure to follow, you must be sure to know where the problem comes from. Indeed, it is from time to time unnecessary to replace the entire window regulator, a simple repair will sometimes work. Whether it concerns a false contact, or simply a lack of lubrication. Now that you are sure of the cause of the concern, let us return to our subject.window-changer-Seat-Fura

Replacing a Seat Fura window regulator: how to do it

Replacing a window regulator is quite tedious. Depending on your experience in the field, count approximately two o'clock to make sure you have the time you need. Whether on a Seat Fura or on another vehicle, this operation is for experienced DIY enthusiasts. So let's take a look at what to do, step by step. It is advisable to take photos at several stages in order to help you assemble the new window regulator.

Removing a window regulator on a Seat Fura

  • Remove the entire door trim. From the mirror cover to the handle. This should be done very gently with a flat screwdriver. It will be necessary to ensure that you have access to the window regulator at any point without being disturbed. This manipulation is quite long to perform.
  • Remove the window regulator seals from your Seat Fura. Again, it is important to take it delicately.
  • Now that you have access to the window regulator, remove the connectors. You can then release the motor from the window regulator in the event that it is stuck.
  • Take out all the fasteners that hold the glass, then release it. It is occasionally preferable to position the window halfway up to be able to carry out this operation. Of course you have to be very careful when moving the glass. It is advisable to put it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is important to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held by screws or rivets, so they must be removed.

Installation of an electric window regulator in a Seat Fura

  • Fit the new window regulator. Make sure that its position is similar to the previous window regulator. You will certainly have to use the fasteners that you have set aside.
  • Replace the glass in the same way as you took it out. It will occasionally be necessary to rotate it slightly so that it fits correctly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Replace the door trim assembly.

That's it, you now have a new and working window regulator . So you can put the ignition on and test it.