The advantage of an electric window regulator is enormous in comparison with manual mechanisms. However, it has the defect of being much more complex in terms of repairs. In addition, it is not always easy to pinpoint the origin of the problem. Here we will see how to replace the electric window regulator of a seat ibiza . But before you start, be sure you understand where the problem is coming from. Let's be clear, it is sometimes unnecessary to change the entire window regulator, a simple repair can sometimes be enough. Whether it concerns a false contact, or simply a lack of lubrication. Now that you are sure of the nature of the dysfunction, let's get to the heart of the matter.
How to replace a seat ibiza window regulator
Changing a window regulator is quite long. Depending on your expertise on the subject, count approximately three hours to make sure you don't get caught in the weather. Whether on a seat ibiza or on another car, this repair is for experienced DIY enthusiasts. So let's take a look at what to do, step by step. We advise you to take pictures at several stages to help you mount the new window regulator.
Removing a window regulator on a seat ibiza
- Remove the entire door trim. From the mirror cover to the handle. This should be done with enough caution with a flat screwdriver. It will be necessary to ensure that you have access to the window regulator at any point without being disturbed. This step is quite long to perform.
- Remove the window regulator seals from your seat ibiza. Again, it is wiser to do it carefully.
- Now that you have accessed the window regulator, disconnect the connectors. You must then release the window lifter motor when it is blocked.
- Release all the fasteners that hold the glass, then take it out. It is sometimes more advisable to place the window halfway up to be able to carry out this manipulation. Of course you have to be very careful when moving the glass. It is advisable to place it on a rather thick sheet.
- Remove the window regulator entirely. It is wiser to memorize your location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held in place by screws or rivets, so they must be removed.
Installing an electric window regulator on a seat ibiza
- Fit the new window regulator. Make sure that its location is similar to the damaged window regulator. You will probably have to use the fasteners that you have set aside.
- Replace the glass in the same way as you took it out. It will sometimes be necessary to move it a little so that it fits properly in its guide.
- Connect the connectors.
- Replace the seals that you have carefully removed.
- Reassemble the door trim assembly.
It's done, you now have a new and working window regulator . So you need to turn on your car and test it.