The interest of an electric window regulator is undeniable in comparison with manual window regulators. However, it has the drawback of being much more complicated in terms of repairs. Also, it is not necessarily easy to precisely identify the origin of the failure. In this article we will see how to change the electric window of a Suzuki Alto 2 . But before seeing the procedure to follow, you must be sure to understand where the dysfunction came from. Indeed, it is from time to time unnecessary to replace the entire window regulator, a simple repair will often suffice. Whether it concerns an electrical short circuit, or simply a lack of lubrication. Now that you're sure where the problem is, let's get to the heart of the matter.
How to replace a Suzuki Alto 2 window regulator
The change of a window regulator is relatively long. Depending on your expertise in the field, approximately count two o'clock to make sure you have the necessary time. Whether for a Suzuki Alto 2 or on another vehicle, this manipulation is for experienced handymen. So let's see what to do, step by step. We recommend that you take pictures at different times to help you fit the new window regulator.
Removing a window regulator on a Suzuki Alto 2
- Remove all of the door trim. From the handle to the retro cover. This manipulation must be done relatively gently with a flat screwdriver. You must ensure that you have unimpeded access to the window regulator at all points. This manipulation is quite long to perform.
- Remove the window regulator seals from your Suzuki Alto 2. Once again, it is wiser to do it delicately.
- Now that you have access to the window regulator, disconnect the connectors. You must then release the motor from the window regulator when it is stuck.
- Release all of the fasteners that hold the glass, then remove the latter. From time to time it is advisable to position the window halfway up to be able to carry out this manipulation. Of course, great care must be taken when handling the glass. It is best to place it on a rather thick sheet.
- Remove the window regulator as a whole. It is wiser to memorize your position well. You can take a picture of it if it helps you attach the new window regulator. The window regulator is occasionally held by screws or rivets, so you have to remove them.
Installation of an electric window for a Suzuki Alto 2
- Present the new window regulator. Make sure that its location is similar to the damaged window regulator. You will probably have to use the fasteners that you have set aside.
- Reposition the glass as you removed it. It will be necessary from time to time to rotate it a little so that it fits correctly in its guide.
- Reconnect the connectors.
- Replace the seals you removed.
- Replace all of the door trim.
That's it, you now have a new and functional window regulator . So you have to put the ignition on and test it.