The advantage of an electric window regulator is enormous in comparison with manual systems. Nevertheless, it has the defect of being much more complex in terms of repairs. Also, it is not necessarily easy to pinpoint the origin of the fault. In this article we will see how to repair the electric window regulator of a Suzuki Alto . But before you start, you need to be sure you know where the fault came from. Let's be clear, it is from time to time unnecessary to replace the entire window regulator, a simple small repair can sometimes work. Whether it concerns an electrical short circuit, or just a lack of lubrication. Now that you are sure of the source of the malfunction, let's get back to our topic.change-window-lift-Suzuki-Alto

Replacing a window regulator from Suzuki Alto: how to do it

Changing a window regulator is rather tedious. Depending on your expertise on the subject, count approximately two o'clock to make sure you don't get caught up in time. Whether it is on a Suzuki Alto or on another car, this operation is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take pictures at different times to help you mount the new window regulator.

Removing a window regulator on a Suzuki Alto

  • Remove the entire door trim. From the handle to the mirror cover. This should be done very gently using a flat screwdriver. You will have to make sure to access the window regulator at any point without being embarrassed. This manipulation is the longest to execute.
  • Remove the window regulator seals from your Suzuki Alto. Again, it's wiser to do it delicately.
  • Now that you have accessed the window regulator, remove the connectors. You must then remove the motor from the window regulator when it is blocked.
  • Remove all the fasteners that hold the window, then remove the window. It is from time to time more advisable to position the window halfway up to perform this operation. Of course we will have to be very careful when handling the glass. It is best to put it on a rather thick sheet.
  • Remove the window regulator completely. It is wiser to remember your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is from time to time held in place by screws or rivets, it will therefore be necessary to remove them.

The installation of an electric window regulator of a Suzuki Alto

  • Fit the new window regulator. Make sure that its location is identical to the damaged window regulator. You should certainly use the fasteners you have removed.
  • Replace the glass in the same way as you removed it. It will be necessary from time to time to rotate it a little so that it fits properly in its guide.
  • Reconnect the connectors.
  • Fit the seals that you have carefully removed.
  • Replace the entire door trim.

It's done, you now have a new and working window regulator . You must therefore switch on the ignition and test it.