The advantage of an electric window regulator is undeniable compared to manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to identify precisely the nature of the failure. Here we will see how to repair the electric window regulator of a Suzuki Celerio . But before seeing the procedure to follow, you must be certain to understand where the dysfunction comes from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can sometimes work. Whether it's an electrical short circuit, or just a lack of oil. Now that you've identified the cause of the concern, let's get back to our topic.
Replacing a window regulator from Suzuki Celerio: how to do it
The replacement of a window regulator is rather long. Depending on your experience on the subject, plan about three hours to make sure you don't get caught up in time. Whether on a Suzuki Celerio or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's look at how to do it, step by step. We advise you to take pictures at several stages in order to help you reassemble the new window regulator.
Removing a window regulator on a Suzuki Celerio
- Remove the entire door trim. From the mirror cover to the handle. This should rather be done with care using a flat screwdriver. It will be necessary to ensure that you have access to the window regulator at any point without being disturbed. This step is the longest to execute.
- Remove the window regulator seals from your Suzuki Celerio. Again, it is essential to do this with care.
- Now that you have access to the window regulator, remove the connectors. You will then have to remove the motor from the window regulator if it is blocked.
- Remove all the fasteners that hold the glass, then take it out. It is sometimes preferable to position the window halfway up to carry out this manipulation. Of course, extreme care must be taken when moving the glass. It is best to put it on a rather thick sheet.
- Remove the window regulator entirely. It is essential to remember your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held by screws or rivets, so you must remove them.
The installation of an electric window regulator of a Suzuki Celerio
- Position the new window regulator. Make sure that its location is similar to the damaged window regulator. You will probably have to use the fasteners that you have set aside.
- Replace the glass just as you pulled it out. It will sometimes be necessary to rotate it slightly so that it fits correctly in its guide.
- Reconnect the connectors.
- Replace the seals that you have carefully removed.
- Refit the entire door trim.
That's it, you now have a new and working window regulator . You will therefore have to switch on and test it.