The advantage of an electric window regulator is enormous in comparison with manual mechanisms. However, it has the defect of being much more complicated in terms of repairs. In addition, it is not always easy to pinpoint the source of the problem. With this article, we will see how to replace the electric window regulator of a Suzuki Grand Vitara 2 . But before seeing the procedure to follow, you must be sure to understand where the dysfunction comes from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple repair will sometimes suffice. Whether it concerns a false contact, or simply a lack of lubrication. Now that you are sure of the source of the concern, let us return to our subject.change-window-lift-Suzuki-Grand-Vitara-2

Replacing a window regulator in Suzuki Grand Vitara 2: how to do it

Changing a window regulator is rather tedious. Depending on your expertise on the subject, plan approximately two o'clock to make sure you don't get caught in the weather. Whether it is for a Suzuki Grand Vitara 2 or on another vehicle, this operation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take pictures at several stages in order to help you reassemble the new window regulator.

Removing a window regulator on a Suzuki Grand Vitara 2

  • Remove all of the door trim. From the mirror cover to the handle. This should be done very gently with a flat screwdriver. You must ensure that you access the window regulator at any point without being disturbed. This manipulation is quite long to perform.
  • Remove the window regulator seals from your Suzuki Grand Vitara 2. Again, it's important to do it gently.
  • Now that you have accessed the window regulator, remove the connectors. You can then release the window lifter motor if it is ever blocked.
  • Release all the fasteners that hold the window, then release it. It is sometimes advisable to position the window halfway up to be able to carry out this operation. Of course we will have to be very careful when moving the glass. It is best to put it on a rather thick sheet.
  • Remove the window regulator entirely. It is important to remember your position correctly. You can take a picture of it if it helps you fix the new window regulator. The window regulator is at times held by screws or rivets, you must therefore remove them.

Installing an electric window regulator on a Suzuki Grand Vitara 2

  • Fit the new window regulator. Make sure its location is similar to the damaged window regulator. You will probably need to use the fasteners you have set aside.
  • Reposition the glass in the same way as you removed it. At times it will be necessary to rotate it a little so that it fits properly in its guide.
  • Reconnect the connectors.
  • Replace the seals that you have carefully removed.
  • Replace all of the door trim.

It's good, you now have a new and functional window regulator . You can therefore switch on the ignition and test it.