The advantage of an electric window regulator is undeniable in comparison with manual window regulators. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not always easy to pinpoint the nature of the problem. In this article, we will discover how to change the electric window regulator of a Suzuki Grand Vitara Xl-7 . But before you start, you need to be sure you understand where the problem is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple small repair will sometimes suffice. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you are sure of the cause of the concern, let us return to our subject.change-window-lift-Suzuki-Grand-Vitara-Xl-7

Replacing a window regulator for Suzuki Grand Vitara Xl-7: how to do it

Replacing a window regulator is relatively time-consuming. Depending on your experience in the field, count approximately two o'clock to make sure you don't get caught in the weather. Whether it's for a Suzuki Grand Vitara Xl-7 or another car, this repair is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take photos at different times to help you mount the new window regulator.

Removing a window regulator on a Suzuki Grand Vitara Xl-7

  • Remove all of the door trim. From the mirror cover to the handle. This should be done relatively carefully using a flat screwdriver. You will have to make sure to access the window regulator at any point without being embarrassed. This manipulation is the longest to perform.
  • Remove the window regulator seals from your Suzuki Grand Vitara Xl-7. Again, it is essential to take it delicately.
  • Now that you have access to the window regulator, remove the connectors. You will then have to disengage the window lifter motor if it is blocked.
  • Take out all the fasteners that hold the glass, then take it out. It is sometimes more judicious to position the window halfway up to be able to carry out this manipulation. Obviously, extreme care must be taken when handling the glass. It is best to place it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is essential to remember its location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held in place by screws or rivets, it will therefore be necessary to remove them.

Installing an electric window regulator on a Suzuki Grand Vitara Xl-7

  • Position the new window regulator. Make sure that its location is similar to the previous window regulator. You will probably have to use the clips you removed.
  • Replace the glass as you removed it. Sometimes it will be necessary to move it a little so that it fits properly in its guide.
  • Reconnect the connectors.
  • Replace the seals you removed.
  • Replace all of the door trim.

It's good, you now have a new and working window regulator . You will therefore have to turn on your car and test it.