The advantage of an electric window regulator is undeniable compared to manual mechanisms. However, it has the defect of being much more restrictive in terms of repairs. Also, it is not necessarily easy to identify precisely the cause of the failure. Here we will find out how to change the electric window regulator of a Suzuki Grand Vitara . But before you start, you have to be sure you understand where the malfunction is coming from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair will sometimes suffice. Whether it concerns an electrical short circuit, or simply a lack of oiling. Now that you are sure of the nature of the problem, let us return to our subject.change-window-lift-Suzuki-Grand-Vitara

Replacing a window regulator in Suzuki Grand Vitara: how to do it

Changing a window regulator is quite time consuming. Depending on your experience in the field, plan about three hours to make sure you don't get caught up in time. Whether for a Suzuki Grand Vitara or another car, this manipulation is for experienced DIY enthusiasts. So let's take a look at what to do, step by step. It is advisable to take pictures at different times to help you mount the new window regulator.

Removing a window regulator on a Suzuki Grand Vitara

  • Remove the entire door trim. From the mirror cover to the handle. This should be done very gently with a flat screwdriver. You must ensure that you access the window regulator at all points without being obstructed. This step is the longest to execute.
  • Disassemble the window regulator seals from your Suzuki Grand Vitara. Again, it's wiser to do it delicately.
  • Now that you have access to the window regulator, disconnect the connectors. You must then release the motor from the window regulator when it is stuck.
  • Remove all the fasteners that hold the glass, then take it out. It is sometimes preferable to position the window halfway up to be able to carry out this manipulation. Of course you have to be very careful when moving the window. It is advisable to place it on a sufficiently thick sheet.
  • Disassemble the window regulator entirely. It is wiser to remember your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is at times held by screws or rivets, you must therefore remove them.

The installation of an electric window regulator of a Suzuki Grand Vitara

  • Introduce the new window regulator. Make sure that its position is similar to the previous window regulator. You will probably have to use the clips you removed.
  • Replace the glass just as you took it out. At times it will be necessary to move it a little so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Refit the entire door trim.

That's it, you now have a new and working window regulator . You must therefore switch on the ignition and test it.