The interest of an electric window regulator is undeniable compared to manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not always easy to pinpoint the origin of the failure. With this article we will see how to change the electric window of a Suzuki Kizashi . But before you start, you need to be sure you know where the problem is coming from. Indeed, it is regularly unnecessary to replace the entire window regulator, a simple small repair can sometimes work. Whether it concerns an electrical short circuit, or only a lack of oiling. Now that you are sure where the problem is, let's get back to our topic.
Suzuki Kizashi window regulator replacement: how to do it
Replacing a window regulator is quite time consuming. Depending on your experience in the field, plan approximately two o'clock in order to be sure not to be taken by the time. Whether on a Suzuki Kizashi or on another car, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, point by point. We recommend that you take a picture at different times to help you fit the new window regulator.
Removing a window regulator on a Suzuki Kizashi
- Remove the entire door trim. From the handle to the retro cover. This manipulation must be done carefully enough using a flat screwdriver. You will have to make sure you can access the window regulator at all points without being disturbed. This step is the longest to perform.
- Remove the window regulator seals from your Suzuki Kizashi. Again, it is essential to do it delicately.
- Now that you have access to the window regulator, remove the connectors. You can then remove the motor from the window regulator if it is blocked.
- Release all of the clips that hold the window in place, then release the window. It is regularly more advisable to place the window halfway up to be able to carry out this manipulation. Of course, you will have to be extremely careful when moving the window. It is better to put it on a rather thick sheet.
- Disassemble the window regulator as a whole. It is essential to remember your location well. You can take a picture of it if it helps you fit the new window regulator. The window regulator is regularly held by screws or rivets, they must therefore be removed.
The installation of an electric window of a Suzuki Kizashi
- Present the new window regulator. Check that its position is similar to the damaged window regulator. You will probably have to use the fasteners you put aside.
- Reposition the glass in the same way as you removed it. It will regularly be necessary to rotate it slightly so that it fits properly in its guide.
- Reconnect the connectors.
- Replace the seals that you have carefully removed.
- Replace all of the door trim.
It's done, you now have a new and functional window regulator . You can therefore turn on your car and test it.