The advantage of an electric window regulator is substantial in comparison with manual systems. On the other hand, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the origin of the problem. Here we will see how to repair the electric window regulator of a Suzuki Liana . But before seeing the procedure to follow, you must be certain to understand where the problem came from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair can sometimes be enough. Whether it's a false contact, or simply a lack of lubrication. Now that you have identified the cause of the malfunction, let's go back to our subject.
Replacing a window regulator from Suzuki Liana: how to do it
Changing a window regulator is relatively tedious. Depending on your experience on the subject, count approximately two o'clock to make sure you have the time you need. Whether for a Suzuki Liana or another car, this manipulation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take pictures at several stages in order to help you reassemble the new window regulator.
Removing a window regulator on a Suzuki Liana
- Remove the entire door trim. From the mirror cover to the handle. This should be done relatively carefully using a flat screwdriver. It will be necessary to ensure access to the window regulator at any point without being obstructed. This step is quite long to perform.
- Remove the window regulator seals from your Suzuki Liana. Again, it is essential to do this carefully.
- Now that you have accessed the window regulator, remove the connectors. You must then release the window lifter motor if it is ever stuck.
- Release all the fasteners that hold the glass, then remove the glass. It is sometimes advisable to position the window halfway up to carry out this manipulation. Of course you will have to be very careful when handling the glass. It is best to put it on a sufficiently thick sheet.
- Remove the window regulator entirely. It is essential to memorize your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held in place by screws or rivets, so you must remove them.
The installation of an electric window regulator of a Suzuki Liana
- Fit the new window regulator. Make sure that its position is similar to the previous window regulator. You will probably need to use the fasteners you have set aside.
- Replace the glass just as you took it out. Sometimes it will be necessary to move it a little so that it fits properly in its guide.
- Connect the connectors.
- Replace the seals you removed.
- Replace the door trim assembly.
It's done, you now have a new and working window regulator . So you need to turn on your car and test it.