The advantage of an electric window regulator is enormous compared to manual systems. Nevertheless, it has the defect of being much more complex in terms of repairs. Also, it is not necessarily easy to identify precisely the source of the problem. With this article, we will see how to replace the electric window regulator of a Suzuki Samurai . But before seeing the procedure to follow, you must be certain to understand where the failure comes from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair will sometimes work. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you are sure of the cause of the malfunction, let's get to the heart of the matter.
Replacing a window regulator from Suzuki Samurai: how to do it
Replacing a window regulator is quite tedious. Depending on your experience on the subject, count about two o'clock to make sure you have the time you need. Whether for a Suzuki Samurai or another car, this repair is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take pictures at different times to help you mount the new window regulator.
Removing a window regulator on a Suzuki Samurai
- Remove the entire door trim. From the mirror cover to the handle. This should be done very gently with a flat screwdriver. It will be necessary to ensure that you have access to the window regulator at any point without being disturbed. This manipulation is quite long to execute.
- Remove the window regulator seals from your Suzuki Samurai. Again, it's important to be careful.
- Now that you have access to the window regulator, remove the connectors. You must then remove the motor from the window regulator if it is stuck.
- Remove all the fasteners that hold the window, then remove the window. It is sometimes advisable to place the window halfway up to be able to carry out this manipulation. Of course you have to be very careful when moving the window. It is advisable to place it on a rather thick sheet.
- Remove the window regulator as a whole. It is important to remember its location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is at times maintained by screws or rivets, it is therefore necessary to remove them.
The installation of an electric window regulator of a Suzuki Samurai
- Position the new window regulator. Make sure that its position is similar to the damaged window lifter. You will certainly need to use the fasteners you have set aside.
- Reposition the glass in the same way as you removed it. At times it will be necessary to move it a little so that it fits correctly in its guide.
- Reconnect the connectors.
- Fit the seals that you have carefully removed.
- Replace the entire door trim.
That's it, you now have a new and functional window regulator . You must therefore turn on your car and test it.