The advantage of an electric window regulator is substantial in comparison with manual window regulators. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to determine precisely the nature of the problem. With this article, we will see how to repair the electric window regulator of a Suzuki Splash . But before seeing the procedure to follow, you must be certain to understand where the failure came from. Let us be clear, it is regularly useless to replace the whole window regulator, a simple repair will sometimes be enough. Whether it concerns a false contact, or simply a lack of oil. Now that you've identified the cause of the problem, let's get back to our topic.change-window-lift-Suzuki-Splash

Replacing a window regulator in Suzuki Splash: how to do it

Changing a window regulator is rather time-consuming. Depending on your expertise on the subject, count approximately three hours to make sure you have the time you need. Whether on a Suzuki Splash or on another vehicle, this repair is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take pictures at several stages to help you install the new window regulator.

Removing a window regulator on a Suzuki Splash

  • Remove the entire door trim. From the mirror cover to the handle. This should rather be done with caution using a flat screwdriver. You must ensure that you access the window regulator at all points without being obstructed. This step is the longest to execute.
  • Disassemble the window regulator seals from your Suzuki Splash. Again, it is essential to do this carefully.
  • Now that you have accessed the window regulator, remove the connectors. You can then remove the motor from the window regulator if it is stuck.
  • Remove all the fasteners that hold the glass, then take it out. It is regularly more advisable to place the window halfway up to perform this operation. Of course you will have to be very careful when handling the glass. It is best to put it on a rather thick sheet.
  • Disassemble the window regulator as a whole. It is essential to memorize your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is regularly held by screws or rivets, it is thus necessary to remove them.

Installation of an electric window regulator in a Suzuki Splash

  • Introduce the new window regulator. Make sure that its location is similar to the previous window regulator. You will probably need to use the bindings that you have set aside.
  • Replace the glass as you removed it. It will be regularly necessary to move it a little so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Reassemble the door trim assembly.

It's done, you now have a new and working window regulator . So you can switch on and test it.