The advantage of an electric window regulator is substantial in comparison with manual systems. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the origin of the failure. Here we will see how to replace the electric window on a Suzuki Swift 2 . But before you start, you have to be sure you know where the problem comes from. Indeed, it is regularly unnecessary to change the entire window regulator, a simple repair can sometimes suffice. Whether it's a false contact, or just a lack of oiling. Now that you are sure what the problem is, let's get back to our topic.
Replacing a window regulator in Suzuki Swift 2: how to do it
Replacing a window regulator is quite tedious. Depending on your experience in the field, count approximately two o'clock in order to be sure to have the necessary time. Whether on a Suzuki Swift 2 or on another car, this manipulation is for experienced DIY enthusiasts. So let's look at what to do, step by step. We recommend that you take a picture in several steps to help you fit the new window regulator.
Removing a window regulator on a Suzuki Swift 2
- Remove all of the door trim. From mirror cover to handle. This manipulation must be done carefully enough with a flat screwdriver. Make sure you have access to the window regulator at all points without being disturbed. This step is the longest to perform.
- Remove the window regulator seals from your Suzuki Swift 2. Once again, it is important to do this carefully.
- Now that you have accessed the window regulator, disconnect the connectors. You must then remove the motor from the window regulator if it is stuck.
- Release all of the fasteners that hold the window in place, then remove the window. It is regularly recommended to position the window halfway up to be able to perform this manipulation. Of course, you will have to be extremely careful when handling the glass. It is advisable to put it on a rather thick sheet.
- Disassemble the window regulator completely. It is important to remember your position well. You can take a picture of it if it helps you fit the new window regulator. The window regulator is regularly held by screws or rivets, it will therefore be necessary to remove them.
The installation of an electric window regulator of a Suzuki Swift 2
- Fit the new window regulator. Make sure that its position is similar to the damaged window regulator. You will certainly need to use the fasteners you removed.
- Replace the glass just as you took it out. It will regularly be necessary to rotate it slightly so that it fits correctly in its guide.
- Connect the connectors.
- Replace the seals that you have carefully removed.
- Refit all of the door trim.
It's good, you now have a new and working window regulator . You will therefore have to switch on and test it.