The interest of an electric window regulator is consequent compared to the manual mechanisms. However, it has the drawback of being much more complex in terms of repairs. Also, it is not necessarily easy to pinpoint the exact cause of the failure. With this article we will see How to repair the electric window of a Suzuki Swift 4 . But before you can see what to do, you need to be sure you know where the problem is coming from. Indeed, it is from time to time unnecessary to replace the entire window regulator, a simple repair will sometimes work. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you've identified the cause of the problem, let's get to the heart of the matter.change-WINDOW-Suzuki-Swift-4

Replacing a window regulator in Suzuki Swift 4: how to do it

The replacement of a window regulator is relatively long. Depending on your expertise in the field, plan approximately two o'clock to make sure you don't get caught up in the weather. Whether on a Suzuki Swift 4 or on another vehicle, this operation is for experienced DIY enthusiasts. So let's see what to do, point by point. We recommend that you take pictures at different times to help you fit the new window regulator.

Removing a window regulator on a Suzuki Swift 4

  • Remove all of the door trim. From mirror cover to handle. This manipulation must be done relatively delicately with a flat screwdriver. Make sure you have access to the window regulator at all points without being hampered. This step is the longest to perform.
  • Remove the window regulator seals from your Suzuki Swift 4. Once again, it is essential to do it delicately.
  • Now that you have accessed the window regulator, remove the connectors. You must then release the window lifter motor if it is stuck.
  • Take out all the fasteners that hold the glass, then remove the latter. From time to time, it is advisable to place the window halfway up to carry out this manipulation. Of course, great care must be taken when handling the glass. It is advisable to put it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is essential to remember your location well. You can take a picture of it if it can help you attach the new window regulator. The window regulator is from time to time held in place by screws or rivets, so they have to be removed.

The installation of an electric window regulator of a Suzuki Swift 4

  • Position the new window regulator. Make sure that its position is similar to the damaged window lifter. You will probably have to use the fixings that you removed.
  • Replace the glass the same way you removed it. From time to time it will be necessary to rotate it slightly so that it fits properly in its guide.
  • Reconnect the connectors.
  • Replace the seals that you have carefully removed.
  • Refit all of the door trim.

It's done, you now have a new and functional window regulator . So you have to turn on your car and test it.