The interest of an electric window regulator is consequent compared to the manual systems. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the origin of the problem. Here we will find out How to repair the electric window of a Suzuki Swift . But before you start, you have to be sure you know where the problem is coming from. Indeed, it is from time to time unnecessary to change the entire window regulator, a simple small repair can often work. Whether it is a false contact, or simply a lack of lubrication. Now that you've identified the cause of the concern, let's get to the heart of the matter.change-window-Suzuki-Swift

Suzuki Swift window regulator replacement: how to do it

Changing a window regulator is quite long. Depending on your experience on the subject, count approximately three hours to make sure you have the necessary time. Whether on a Suzuki Swift or on another vehicle, this operation is for experienced DIY enthusiasts. So let's see how to do it, step by step. We recommend that you take pictures in several steps to help you fit the new window regulator.

Removing a window regulator on a Suzuki Swift

  • Remove the entire door trim. From mirror cover to handle. This manipulation must be done carefully enough with a flat screwdriver. Make sure to access the window regulator at all points without being disturbed. This manipulation is the longest to perform.
  • Remove the window regulator seals from your Suzuki Swift. Again, it's wiser to go about it delicately.
  • Now that you have access to the window regulator, remove the connectors. You can then disengage the window lifter motor if it is ever stuck.
  • Remove all the fasteners that hold the glass, then remove the glass. From time to time, it is advisable to position the window halfway up to be able to perform this manipulation. Of course, extreme care must be taken when handling the glass. It is preferable to put it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is wiser to memorize its location well. You can take a picture of it if it helps you fit the new window regulator. The window regulator is held in place by screws or rivets from time to time, so you have to remove them.

The installation of an electric window of a Suzuki Swift

  • Position the new window regulator. Make sure that its location is similar to the previous window regulator. You may need to use the bindings you have set aside.
  • Reposition the glass as you removed it. It will be necessary from time to time to make it move a little so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Replace the door trim assembly.

It's done, you now have a new and functional window regulator . So you can put the ignition on and test it.