The advantage of an electric window regulator is substantial compared to manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. In addition, it is not always easy to pinpoint the source of the problem. Here we will see how to change the electric window of a Suzuki Vitara 2 . But before seeing what to do next, you have to be sure you understand where the failure is coming from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair can sometimes work. Whether it concerns a false contact, or simply a lack of oiling. Now that you're sure what's causing the problem, let's get to the heart of the matter.change-window-lift-Suzuki-Vitara-2

Replacing a window regulator in Suzuki Vitara 2: how to do it

Changing a window regulator is rather tedious. Depending on your experience in the field, plan approximately two o'clock to make sure you don't get caught up in the time. Whether on a Suzuki Vitara 2 or on another vehicle, this operation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We recommend that you take a picture in several steps to help you reassemble the new window regulator.

Removing a window regulator on a Suzuki Vitara 2

  • Remove the entire door trim. From mirror cover to handle. This manipulation should be done rather delicately using a flat screwdriver. You must ensure that you have unimpeded access to the window regulator at all points. This manipulation takes quite a long time to perform.
  • Remove the window regulator gaskets from your Suzuki Vitara 2. Once again, it is important to do this with care.
  • Now that you have access to the window regulator, disconnect the connectors. You will then have to remove the motor from the window regulator in case it is stuck.
  • Release all the fasteners that hold the glass, then release the latter. It is sometimes more advisable to place the window halfway up to be able to carry out this manipulation. Of course, you will have to be very careful when handling the glass. It is best to place it on a rather thick sheet.
  • Disassemble the window regulator completely. It is important to remember its location. You can take a picture of it if it helps you fit the new window regulator. The window regulator is sometimes held by screws or rivets, so they will have to be removed.

The installation of an electric window regulator of a Suzuki Vitara 2

  • Present the new window regulator. Make sure that its position is similar to the previous window regulator. You will probably have to use the fasteners you removed.
  • Replace the glass as you removed it. It will at times be necessary to rotate it a little so that it fits correctly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Replace the door trim assembly.

It's good, you now have a new and working window regulator . You will therefore have to switch on and test it.